Brembo 09.9871.11 Prime UV Coated Brake Disc (Rear) - 358mm

Brake discs should generally be replaced every 30,000 to 70,000 miles, depending on driving style and environment. Inspect or replace them immediately if you experience steering wheel vibration during braking, a visible lip on the outer edge of the disc, or if the thickness falls below the manufacturer’s minimum thickness limit. If any of those conditions are present, replace immediately to maintain safe stopping performance.

Yes — it is highly recommended. When you install new discs, the surface is perfectly flat. Old brake pads have wear patterns and grooves from the previous discs; if reused, they won’t make full contact with the new disc, leading to reduced stopping power and uneven wear. For the best safety and performance, always install new pads with new discs.

No. Unlike traditional brake discs that are oiled to prevent rust and must be cleaned with brake cleaner before use, Brembo UV‑coated discs are ready to install right out of the box. The specialized UV coating is designed to remain on the hub and outer edges to provide long‑term corrosion resistance. The coating on the braking surface will safely wear away during the first few stops.

Vented (Standard/Prime): Most front discs are vented with internal vanes to help heat escape. These are ideal for daily driving.

Drilled (Brembo Xtra): These have holes to improve initial "bite", reduce weight, and allow water and gases to escape quickly; they also give a sporty look and feel.

Slotted (Brembo Max): These have grooves that clean the brake pad surface and prevent gas buildup, making them excellent for consistent performance in high‑heat or wet conditions.