Blank your vehicle with luxurious foam

• The 2 liters size easily holds enough product to wash a whole car and detail the tires
• To be used optimally with a foam - e.g. 3D Pink Car Soap, Wash N Wax, CarPro Reset, Hydrofoam, Iron X Snow Soap or similar.**
• Adjustable nozzle (from fog to jet) and from top to bottom and right to left
• Easy dosing by transparent capacity horizontal display on the bottle
• Fitted with VITON seals which are highly chemical resistant and the stabilization ring at the bottom of the bottle secures and protects the bottle from damage.

Step by Step:

• Before working, check the safety valve to ensure it is functioning correctly. Air must escape when you press the valve lever into the spray head
• Unscrew the spray head and pour working fluid into the container
• Be reminded to prepare chemicals according to manufacturer’s instruction
• Screw on spray head. Bring the sprayer at the place of work
• Inflates it until the safety valve responds
• Align the atomizer nozzle to the desired spray location and press the valve lever on the spray button. During application, the degree of liquid atomization can be adjusted
• After spraying, release the pressure from the tank
• For long life and reliability, rinsing and cleaning the sprayer after use

Precautions:

• Wear safety glasses, gloves and rubber boots to protect the body when spraying
• Thoroughly wash up after using harmful chemicals
• Do not eat, drink or smoke when working with chemicals
• Chemicals should be prepared and used according to the manufacturer’s instructions
• Never use flammable, highly corrosive, explosive agents in the sprayer
• Make sure the spray does not leak into open bodies of water, e.g. rivers, lakes, ponds
• Any remaining spray mix should be diluted with water and completely wash the sprayer with water after work and make sure no chemical agents is left in the sprayer
• Keep it away from children and pregnant women