• Restore the rich and glossy finish of your exterior trim -

• Made from high-grade organic silica, the durable glass coating restores faded trim to look like new again

• Offers a semi-permanent coating to exterior trim with great UV protection and hydrophobic power
• Can be used on textured or smooth plastic, as well as aluminum wheels & plastic finished wheels
• Heat resistance to 800c+
• Durability lasts 12 months or more

Step by Step:

1. Make sure the surface is cool and dry. Do not apply to the hot surface or in direct sun.
2. Clean the surface with an all-purpose cleaner, rinse clean, and allow to dry
3. Use CarPro Eraser to remove any residue, and wait until it is completely dry
4. Wet the applicator with 5-6 drops of DLUXand spread evenly across the surface
5. Let cure 1 minute before buffing
6. Use a clean suede microfiber to wipe it off gently, in a circular motion until no streaks are left behind
7. Allow the surface to cure for 1-3 hours without any moisture
8. Complete cure with no rain takes 24 hours. Any water marks from rain must be wiped off during the first 24 hours

Precautions:

• Never allow highly alkaline (ph12+) chemicals such as non-diluted all-purpose cleaners to sit or dwell on the surface for extended periods. This may damage the coating
• Do not use for other purposes
• If it becomes sticky and tough to remove apply more DLux over the top and buff immediately then work in smaller sections after this or omit the 1 minute cure
• Keep out of reach of children
• Keep away from heat
• Do not ingest
• Avoid contact from eyes
• Wear gloves and face mask during removal