True paint perfection with low heat, high speed leveling

• Utilizes low heat, high speed leveling, thanks to the Alpha Ceramic Alumina abrasive technology
• Works well on soft or hard coat, and even clearcoats and single stage paint
• Cuts P1000 or finer sanding scratches without using fillers, silicones, solvents or kerosene
• Easy to use and easy for cleanup
• Use with rotary or dual action polisher together with wool or foam pad of your selection

Step by Step:

• Shake well before use
• Apply 3D ACA X-Tra Cut Compound either with a 3D Wool or Foam pad, depends on the level of cut needed
• Put 4-5 pea-sized drops on the selected pad
• Set the polishing machine, for rotary, set between 800-1800 rpm; while for dual action polisher, set to speed 4-5
• Work in a 2” x2” area, buff slowly in a back and forth overlapping motions until the correction is complete
• Wipe off any residue with a clean microfiber towel